Manual >Video detect>Schedule
1-channel wire Ethernet port, 10/100 Base-T Ethernet
IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP,
SNMP, RTSP, RTP, SMTP, NTP(Required to synchronize to
recorder), DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, Bonjour
Monitor, system setup, file download, log information, maintenance ,
upgrade and etc
DC12V power and PoE.
Warning!
Do not connect these two power supplying sources to the
deviceat the same time; it may result in device damage!
DC12V 330mA
PoE DC48V 90mA
Note
Panasonic Security Viewer is not supported
EMS (E-Series Management Software) & Mobile-EMS do not support i-PRO series NVR
Only SXVGA recording is available with i-PRO series NVR
See support web page below for further details
http://security.panasonic.com/***