Destination 4.5.2
Path 4.5.2.1
The destination interface is shown as in Figure 4-43.
Path can config record and snapshot storage path. There are three options: Local, FTP and NAS. You
can only select one mode. System can save according to the event types. It is corresponding to the
three modes (General:Scheduled/Motion:Motion Detect /alarm) in the Schedule interface. Please check
the box to enable the save functions.
Note: Only device supports SD card has local.
Figure 4-43
Please refer to the following sheet for detailed information.
Parameter Function
Event Type It includes: scheduled, motion detect and alarm.
(alarm: K-EW214L01E, K-EF234L01E)
Local It saved in the SD card. (K-EW214L01E, K-EF234L01E)
FTP It saved in the FTP server.
NAS It saved in NAS disk. (K-EW214L01E, K-EF234L01E)
Local (K-EW214L01E, K-EF234L01E) 4.5.2.2
The local interface is shown as in Figure 4-44.
Here you can view local Micro SD card or NAS disk information. You can also operate the read-only,
write-only, hot swap and format operation.
65
To Next Page
Loading...
