Panasonic KV-N1058X - Register Jobs; Setting with the Scan Button Setting Tool

8.1.1.13 Register jobs
To perform push scan using jobs by USB connected computer, configure the following settings.
1. Start Image Capture Plus.
• Select [Image Capture Plus Standard] as the application mode.
2. On the [Option] menu, click [Application Settings].
• The [Application Settings] dialog box appears.
3. Select the [Scan Button Settings] tab.
• You can register 10 settings for each group.
• Select the [Job Scan] for "Operation", and then select a job from [Job Setting List].
4. Click [OK] to save the settings.
8.1.1.14 Setting with the Scan Button Setting Tool
To perform push scan using jobs by USB connected computer, configure the following settings.
1. Double click the ( ) icon in the notification area of the task bar to open Scan Button Setting Tool.
• Scan Button Setting Tool will open.
• In Windows 8, open Scan Button Setting Tool on the desktop screen.
2. Select [Touch Free Scanning] or [Single Touch Scanning].
8.1.1 Preparation
65