Panasonic KV-N1058X - Perform Push Scan Using Jobs

8.1.5 Perform Push Scan Using Jobs
Operate the unit as follows.
Note
• If any documents are left in [Document List], Image Capture Plus cannot receive push scan data.
• If the output destination is a computer connected via LAN, you can select a job from the top 10 jobs in
the job settings list.
1. Touch the Favorite button (
).
2. Depending on the output destination, touch [USB] or [PC].
• If the output destination is a computer connected via USB.
• If the output destination is a computer connected via LAN.
3. Select a job.
• If the output destination is a computer connected via USB, select the job after selecting the group.
• If the output destination is a computer connected via LAN, select the job after selecting the computer.
8.1.5 Perform Push Scan Using Jobs
75