12 Using Configuration Web
Network settings for this unit can be configured using the web browser that was launched from Network
Scanner Select Tool.
Note
• Some settings can also be configured using the LCD on the unit (page 38).
• If you are using Internet Explorer 11 and "Display intranet sites in Compatibility View" is selected,
Configuration Web may not be displayed correctly.
12.1 Launch Configuration Web
1. Start Network Scanner Select Tool.
2. Select the desired scanner.
Note
• Select the check box of the scanner you use for pull scan.
3. Click [Configuration Web].
• The web browser will launch.
Notice
• To use Configuration Web, except for the Information tab, "User Name" and "Password" are
necessary. Set "User Name" and "Password" when the password setting screen appears. For
details about the password, refer to "Password Settings" (page 111).
12 Using Configuration Web
93
To Next Page
Loading...
