Panasonic KV-S1015C - Connecting Power and AC Adapter

4. Connect the AC adaptor (A) and the power cord (B).
• Connect the power cord to the AC adaptor.
• Connect the AC adaptor to the scanner.
• Plug into the AC outlet.
12
3
AC adaptor
Power cord
To AC outlet
Notice
• Use only with the power cord and the AC adaptor enclosed with the unit.
• When
the unit is not used over an extended period of time, turn the unit off, and unplug the power cord.
The scanner consumes approximately 0.3 W of electricity even when the main unit is turned off.
22 Operating Manual
Installation