Panasonic KV-S1015C - Preparing Documents for Scanning; Acceptable Document Types and Sizes; Scanning Acceptable Cards

Preparing Documents
Acceptable Documents
The acceptable documents for this scanner are as follows.
Document size:
48–216 mm
(1.9–8.5 in.)
70–2,540 mm
(2.8–100 in.)
Paper thickness for Feeding:
KV-S1026C: 20
–209 g/m²
KV-S1015C: 40–209 g/m²
• The height of all the documents on the tray should be less than 5 mm.
This compares to 50 sheets (80 g/m² or 20 lb.) of new paper.
• With the exception of ISO format cards, the minimum guaranteed feeding length is 70 mm (2.8 in.).
• Single paper feeding is recommended for papers exceeding the legal size length.
Recommended paper: Plain paper
Acceptable cards
ISO format card:
Size: 85.6 x 54 mm (3.4 x 2.1 in.)
Thickness: 0.76 mm (0.03 in.)
Embossed card is also acceptable.
• A maximum of 3 cards can be loaded on the feed tray.
The
height of the total cards (the total thickness including the embossing on each card) should be less than
5 mm (0.2 in.). Additionally, the embossing on each card must not get entangled with others.
• Use the landscape orientation when scanning an embossed card.
If the scanning fails, place the card upside down, and then try again.
• Use the mixed batch card guide (page 37) when scanning mixed media (cards and papers) at the
same time.
30 Operating Manual
O
p
e
r
a
t
i
o
n
Operation