Repacking Instructions
It
is highly recommended that you keep the original carton and ALL packing materials. If you need to transport
or ship the scanner, please follow these instructions.
Note
• Improper repacking of the scanner may result in a service charge to repair the scanner.
• Please use the original carton and all of the original packing materials.
• The scanner should be handled in the correct (horizontal) position.
Required Materials
• Original scanner carton and packing materials
• Shipping tape and scissors
1. Press and hold the power button for one second or more to turn off the scanner power.
2. Unplug the power cord from the outlet, and remove the AC adaptor and USB cable from the scanner.
3. Close the feed tray and exit tray.
• If the mixed batch card guide is not attached to the scanner, attach it.
Operating Manual 59
Appendix
To Next Page
Loading...
