6. Register the settings as needed, and then click [Submit].
If you select [Shared Folder] or [FTP] for "Output Method", you can test whether connection to the
server is possible with the current settings by clicking [Test].
Shared Folder
Item Contents
Account
Domain/Workgroup (up to 63 characters) / User (up to 20
characters) / Password (up to 31 characters)
Folder Path Path (up to 255 characters)
FTP
Item Contents
FTP Server
Server Address (up to 63 characters) / Protocol
*1
/ Port Number /
Passive Mode / Folder Path (up to 255 characters)
Authentication
Method / User (up to 31 characters) / Password (up to 31
characters) / Key
*2
*1 "FTP", "FTPS (Explicit)" and "SFTP" are supported. When sending data over FTP, there is a risk of leakage of account
information, etc.
*2 Refer to "10.5 SFTP Public Key Authentication" (page 93).
Email
Item Contents
Email
To (1) - To (5)
Subject / Comment (up to 15 characters)
*1
*1 Email Subject is "<Host Name> : <Type Code> : <Sequence ID> <User defined subject>". When "Prefix Removal" is
enabled, Email Subject is "<User defined subject>". In the case of an SMTP server test, error notification or scan
notification, the prefix is not removed from the E-mail subject, in order to clarify who the sender is.
7. Click [Edit] of "Scan Settings".
6.4.5 Preparation of Preset Scan mode
59
To Next Page
Loading...
