Panasonic KV-S1065C - Page 13

4. Set the feed tray.
Before using the scanner, follow the steps below to
set the feed tray.
a. Insert the feed tray (A) into the scanner as
shown in the illustration below.
A
b. Push the right (A) and left (B) sides of the feed
tray in that order until the feed tray locks in
place.
A
B
c. Pull out the feed extension tray in the direction
of the arrow shown in the illustration below.
5. Set the exit tray.
The exit tray prevents documents from dropping
after they are scanned. Follow the steps below to
set the exit tray.
a. Raise the exit stopper (A).
A
b. Pull out the exit tray (A) and the exit extension
tray (B).
2
1
Installation Manual 13
Installation