About LED
The status of the scanner can be established by the
condition of the two LED indicators shown in the table
below:
A LED
(Red)
B LED
(Green)
Status
OFF OFF Power is off.
*1
OFF ON Ready
Blink (Slow) ON Caution
OFF Blink (Fast) Warming up
OFF Blink (Slow) Sleep
OFF Blink
(2 times
consecutively)
Double feed
detected error
OFF Blink
(3 times
consecutively)
Dog-ear detected
error
ON OFF Error
*1
If no operation is performed for 30 minutes or longer, the scanner
will be turned OFF automatically. The time until the scanner turns
OFF can be changed with the User Utility.
Installation Manual 15
Installation
To Next Page
Loading...
