5. Select the check box of the desired scanner applications corresponding to the selected event in the "Send
to this application" list.
• To disable the automatic activation of the scanner applications, set the "Disable device events" check
box to on.
6. Click [OK].
Note
• When multiple applications are selected in the "Send to this application" list, the "Choose
Application" dialog box will display, prompting you to select an application in the "Registered
Applications" list. After an application has been selected, it starts. If only one application is selected,
that application will be launched automatically.
7. Restart your computer.
Operating Manual 13
Operation
To Next Page
Loading...
