Scanning Documents
Notice
• Make sure to remove paper clips and staples from documents before scanning. Failing to do so can
damage the unit, document, or both.
• Curled documents may cause a paper jam or damaging the document, therefore, set the document
flat before scanning.
• When scanning important documents, confirm that the number of scanned images matches the number
of pages in the document. Also, check the condition of scanned documents.
• Remove documents from the exit tray after they have been scanned.
• Unsupported thin paper types may not exit at the exit slot correctly.
1. Press the door open button (A), and open the ADF door (B).
Operating Manual 17
Operation
To Next Page
Loading...
