Panasonic KV-S2065L - Page 26

26
Display Panel Instructions
04 Setting the pre-imprinter orientation
• This setting can be done only when a pre-
imprinter is installed.
11 Setting the post-imprinter data
• This setting can be done only when a post-
imprinter is installed.
This is the same as the pre-imprinter.
See “01 Setting the pre-imprinter data”.
• You cannot set the pre-imprinter and post-imprinter to
“Count” at the same time.
12 Setting the post-imprinter position
• This setting can be done only when a post-
imprinter is installed.
This is the same as the pre-imprinter.
See “02 Setting the pre-imprinter position”.
13 Setting the post-imprinter font style
• This setting can be done only when a post-
imprinter is installed.
This is the same as the pre-imprinter.
See “03 Setting the pre-imprinter font style”.
14 Setting the post-imprinter orientation
• This setting can be done only when a post-
imprinter is installed.
This is the same as the pre-imprinter.
See “04 Setting the pre-imprinter orientation”.
04.Pre R
 Hos t
otate
Host 0o
90o
180o
270o
A
B
A
B
AB
AB
:Transfer direction
Prints portrait orientation.
Rotates character string 90 degrees and prints.
Prints portrait orientation from the end of
the character string.
Rotates character string 270 degrees and prints.
0x
90x
180x
270x

11.Pos t
 Hos t
Impr i nt
12.Pos t
Hos t
Position
13.Pos t
 Hos t
Font
14.Pos t
 Hos t
Rotate