4 Operation
4.1 Preparing Documents
Notice
• Make sure to remove paper clips and staples from documents before scanning. Failing to do so can
damage the unit, document, or both.
• Before feeding, ensure that the document is not creased or folded. If the document is creased or
folded, a paper jam or damage to the document may occur
.
• When scanning important documents, confirm that the number of scanned images matches the
number of pages in the feed tray. Also, check the condition of the scanned documents.
• Remove documents from the exit tray after they have been scanned.
4 Operation
22
To Next Page
Loading...
