Software Installation
The software on
the enclosed CD-ROM can be installed
on your computer.
You can select from the 4 installation methods below,
depending on your needs.
a. Complete: Install all of the CD-ROM components.
b. All Drivers & Utilities: Install all of the CD-ROM
components except for applications.
c. Custom: Install one of the drivers, utilities or
manuals.
d. Application: Select and install RTIV or the
QuickScan Pro Demo.
Notice
• Make sure to
log on as an administrator to install
the software.
1. Set the power switch of the scanner to "
" (OFF).
2. Insert
the
included
CD-ROM into the CD/DVD drive
on your computer.
• If you have a feature called "Autorun" activated,
the installation process will start automatically.
• The setup window will appear.
Note
• If the AutoPlay dialog box is displayed in
Windows Vista, select "CDRun.exe".
• If the program does not start automatically,
from [My Computer] ([Computer] in
Windows Vista), select the CD/DVD drive,
and then double-click "CDRun.exe
".
3. Select your scanner model.
4. Select the desired installation methods from the
"Installation" list on the left side of the screen.
• If you selected [Complete] or [All Drivers &
Utilities], continue to step 6.
• If you selected [Custom], continue to step 5.
• If you selected
[RTIV] or [QuickScan Pro Demo]
in "Application", continue to step 6.
Installation Manual 17
Installation
To Next Page
Loading...
