Panasonic KV-S4065CW - Location of Controls: Control Panel; Control Panel Buttons

Control Panel and Status Indicators
Control Panel
5
1
2
3
4
1
Hopper key (Hopper)
Adjusts the hopper position. See "Changing the Hopper Position
" (page 23).
2
ADF select key (ADF)
Sets the feeding method to auto feeding [
] or manual feeding [ ].
3
Paper thickness key (Thickness)
Changes the paper thickness mode according to the document type. See "Changing the Paper
Thickness Mode" (page
24).
4
Start/Stop key (Start/Stop)
• If you set [Wait Key] for
"Manual Feed Mode
"
*1
in your application software, pushing this key
starts scanning.
• During scanning, pushing this key stops scanning.
16 Operating Manual
Location of Controls