Installing the Software
The software on the enclosed Software / Manual CD-ROM can be installed on your computer.
You can select from the 2 installation methods below, depending on your needs.
a. Complete: Install all the drivers, applications, utilities and Operating Manual.
b. Custom: Install one of the software or Operating Manual.
Note
• Normally, it is recommended to select [Complete].
Notice
• Make sure to log on as an administrator to install the software.
1. Check that the unit has been turned off.
• Press the power button for more than one second to turn the unit off.
2. Insert the Software / Manual CD-ROM into the CD/DVD drive on your computer.
• If you have a feature called "Autorun" activated, the installation process will start automatically.
• The setup window will appear.
Note
• If the AutoPlay dialog box is displayed, select [CDRun.exe].
• If the setup window does not appear, double-click [CDRun.exe] in the Software / Manual CD-ROM.
3. Select your scanner model.
4. Check the [Read me first] file.
5. Select the desired installation methods from "Software" on the left side of the screen.
• If you selected [Complete], continue to step 7.
If you selected [Custom], continue to step 6.
20 Operating Manual
Installation
To Next Page
Loading...
