Panasonic KV-S5046H - Performing Push Scan Using the LCD (KV-S5076 H Only)

Performing push scan using the LCD (KV-S5076H
only)
If you are using a KV-S5076H with Image Capture Plus, you can perform push scan using the LCD. Registered
jobs are displayed on the LCD. Use the cursor button (A) and OK button (B) to select a job.
Note
• Register jobs in advance. For details about registering jobs, refer to the Image Capture Plus help.
• The group name is displayed on the first line, and the job name is displayed on the second line of the
LCD.
1
2
1. Place the documents on the feed tray with the side to be scanned facing up.
2. Use or of the cursor button (A) to select a group.
3. Use or of the cursor button (A) to select a job.
4. Press the OK button (B) to start scanning.
Operating Manual 41
Operation