Cleaning the Inside of the Scanner
CAUTION
• Do not touch the conveyor immediately after continuous scanning.
This area becomes very hot and can cause burns.
Wait until the conveyor’s temperature decreases.
Note
• Clean the inside of the scanner when approximately 20,000 sheets have been scanned. The time for
cleaning may differ depending on documents you scan. To maintain proper scanning, clean the scanner
parts frequently.
• Clean the rollers and sensors if paper jamming or double feeding occurs frequently.
• If double feed detection does not function properly, clean the double feed detectors.
• Clean the scanning glass when black or white lines appear on the scanned images.
Operating Manual 49
Care and Maintenance
To Next Page
Loading...
