Panasonic KV-S5046H - Cleaning the Ion Outlets and Sensors

Cleaning the Ion Outlets and Sensors
1. Remove dust from the ion outlets (A) with a cotton swab.
• With a thin cotton swab, remove dust from the ion outlets, and then wipe the center of the inner parts
approximately 5 times.
1
Notice
• Do not apply too much pressure on the parts.
2. Remove dust from the sensors (A, B, C, D, E, F) and reflectors (G) with a cotton swab.
Location of Sensors
1
2
2
3
4
5
6
A Waiting sensor
B Double feed detector
C Slip detect sensor
D Starting sensor
E Paper sensor
F Skew sensor
54 Operating Manual
Care and Maintenance