Panasonic KV-S5046H - Conveyor 2

95
8.5.32. Conveyor 2
9. Remove the poly-slider.
10. Pull out the Drive Roller 1L in the direction of the arrow.
1. Remove the Left Cover. (See 8.5.10.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Rear Cover. (See 8.3.2.)
4. Remove the screw on the right, as seen from the back.
5. Remove the screw(a) on the left, as seen from the back.
6. Remove the Conveyor 2.