7.2 How to Set up the Scan Server
Using the option CD-ROM [KV-SS094]
1. Insert the option CD-ROM [KV-SS094] into the CD/DVD drive of the computer you want to set up as
the scan server.
• The setup window will appear.
• If the AutoPlay dialog box is displayed, select [CDRun.exe].
• If the setup window does not appear, double-click [CDRun.exe] in the option CD-ROM [KV-SS094].
2. Follow the instructions on the screen and complete the installation.
• To install the option CD-ROM [KV-SS094], you need to enter the serial number.
• The serial number is included on the packaging of option CD-ROM [KV-SS094].
3. Start Scan Server Setting Tool as follows.
• Select [All Programs]
[Panasonic] [Scanner Tools] [Scan Server Setting Tool].
Note
In Windows 8 and Windows 10, select the [Panasonic Document Scanner] section on the Apps
screen.
4. Set the computer as the scan server.
• "License: Installed" is displayed.
5. Set up the computer as the scan server for each scanner.
• For details, refer to the help of the Scan Server Setting Tool.
Using the Software / Manual CD-ROM
There are some restrictions on the available functions (page 117).
1. Insert the Software / Manual CD-ROM into the CD/DVD drive on your computer.
• If the AutoPlay dialog box is displayed, select [CDRun.exe].
• If the setup window does not appear, double-click [CDRun.exe] in the Software / Manual CD-ROM.
• When the model selection screen is displayed, select the correct model to use.
2. Select [Complete].
3. Follow the instructions on the screen and complete the installation.
4. Start Scan Server Setting Tool as follows.
• Select [All Programs]
[Panasonic] [Scanner Tools] [Scan Server Setting Tool].
Note
In Windows 8 and Windows 10, select the [Panasonic Document Scanner] section on the Apps
screen.
5. Set the computer as the scan server.
• "License: Not installed" is displayed.
6. Set up the computer as the scan server for each scanner.
• For details, refer to the help of the Scan Server Setting Tool.
7.2 How to Set up the Scan Server
75