Loading Documents on the ADF
16
■ Scanning documents with pages of same sizes
Notice
• Please remove any staples from the document before scanning.
• Glued or curled documents may cause a paper jam or damage the unit, so please scan using the flatbed.
1
Set the manual feed selector to
[Continuous scanning] (AUTO) or
[Manual scanning] (MANUAL).
• When [Manual scanning] is selected, feed
the document 1 page at a time.
• When scanning important documents or
thick (bound) documents, select [Manual
scanning].
2
Documents that have been stapled
together or stacked together (as in a
file folder) will need to be separated.
Fan the stack of documents to sepa-
rate all the edges.
Hold both ends and bend the docu-
ments as shown in the illustration.
To flatten the documents, hold firmly
and pull them apart as shown in the
illustration.
Repeat these steps as necessary.
3
Carefully align the documents.
Manual feed
selector
[Continuous scanning]
Manual feed
selector
[Manual scanning]