24
Loading Documents on the Flatbed
One sheet or an entire book document can be scanned on the document glass.
Scanning documents in this way is known as "scanning with the flatbed".
Caution
• Do not place printed materials containing magnetic ink characters or magnetic strip cards on the flatbed.
Magnets are located in the flatbed cover (flatbed sheet) and may damage data stored on printed materials and
cards.
■ When scanning with the flatbed
1
Raise the hopper tray.
2
Open the document cover.
Notice
• Make sure to always lift up the hopper
tray first before opening the document
cover. (Otherwise, there is a possibility
that the hopper will be damaged.)
3
Place the scanning side of the
document face down on top of the
flatbed glass towards the upper left
corner.
• If the document is bent or folded,
straighten it.
Document cover
Hopper tray
Document
Standard
mark
Flatbed glass
To Next Page
Loading...
