Panasonic KV-S7097 - Checking Events

Using Push Scan
27
■ Checking events
Check the following if an application does not start up after being set by the Scan Button Setting Tool.
1
Display the Scan properties screen.
• If you are using Windows 10:
Right-click [Start], select [Control Panel] [Devices and printers], right-click the scanner icon, and then
display the [Scan properties] screen.
• If you are using Windows 8 / Windows 7:
[Start] [Control Panel] [View devices and printers], right-click the scanner icon, and display the
[Scan properties] screen.
• If you are using Windows Vista:
[Start] [Control Panel] [Scanners and Cameras], select the scanner icon, and then click the
Properties button.
• If you are using Windows XP:
[Start] [Control Panel] [Scanners and Cameras], right-click the scanner icon, and display the
Properties screen.
2
Click the [Events] tab.
3
Check that Scan Button Setting Tool is selected as the program to start for each event.
• If an application other than Scan Button Setting Tool is selected, change the application to Scan But-
ton Setting Tool.
4
Click [OK].
5
Restart the computer.