Panasonic KV-S7097 - Changing the Reference Plate Setting; ADF Reference Plate Setting

30
Changing the Reference Plate Setting
You can choose a background color to be scanned from white (black) to black (white). The scanner comes from
factory set to black. The reference plate (B), reference plate (F) and flatbed sheet setting must be changed
simultaneously.
■ ADF reference plate setting
1
Turn off the scanner.
2
Pull the exit door release to open the
exit door.
3
Using your finger, turn the reference
plate (B) over.
• Confirm that the reference plate has
changed and is locked in its proper posi-
tion.
4
Using your finger, turn the reference
plate (F) over.
•
Confirm that the reference plate has
changed and is locked in its proper posi-
tion.
Exit door release
Reference plate (B)
ADF glass (F)
Reference plate (F)
ADF glass
(B)