Panasonic KV-S7097 - Cleaning Sensors and Double Feed Detectors

Cleaning the Unit
40
■ Cleaning the paper and waiting sensors, double feed detector
1
Turn off the scanner.
2
Push the ADF door release to open the
ADF door.
3
Remove dust from the paper sensor
and waiting sensor with a cotton swab.
4
Remove dust on the surface of the
reflector sheet for the waiting sensor
with a cotton swab.
5
Remove dust from the double feed
detector (G) and double feed detector
(R) with a cotton swab.
6
Close the ADF door.
• When you close the ADF door, close it
securely until it is locked.
Waiting sensor
Reflector sheet
for waiting sensor
Paper sensor
Double feed detector (G)
Double feed detector (R)