Panasonic KV-S7097 - Cleaning Starting and Ending Sensors

Cleaning the Unit
41
■ Cleaning the starting and ending sensors
1
Turn off the scanner.
2
Pull the exit door release to open the
exit door.
3
Remove dust from the starting and
ending sensors with a cotton swab.
4
Remove dust from the reflector sheet
for the starting and ending sensors
with a cotton swab.
5
Close the exit door.
• When you close the exit door, close it
securely until it is locked.
Ending sensor
Startin
g
sensor
Reflector sheet for
starting sensor
Reflector sheet for
ending sensor