Panasonic KX-A143EXC - Page 65

Country
Setting
x Default - no specific country setting, so revert to default value
27.3. EEPROM Layout
27.3.1. General Setup
Address Default Name
Country
Setting
Type Description
0000-01 00 E0 EepromOscillator x A Frequency adjustment
0002 20 ModulationDeviation x A Modulation adjustment
0020 - RFPI (ID for Base Unit) x A RFPI
0025 00 00 AC (Base PIN code) x D AC code
0028 00 TBR22Test x - TBR22 test
0030-0034 FF .. FF IPUI_1 (ID for H/S 1) x D Ipui for handset 1. If set to FF
.
(5bytes) the
handset is not enrolled.
0035-0039 FF .. FF IPUI_2 (ID for H/S 2) x D Ipui for handset 2. If set to FF
.
(5bytes) the
handset is not enrolled.
003A-003E FF .. FF IPUI_3 (ID for H/S 3) x D Ipui for handset 3. If set to FF
.
(5bytes) the
handset is not enrolled.
003F-0043 FF .. FF IPUI_4 (ID for H/S 4) x D Ipui for handset 4. If set to FF
.
(5bytes) the
handset is not enrolled.
0044-0048 FF .. FF IPUI_5 (ID for H/S 5) x D Ipui for handset 5. If set to FF
.
(5bytes) the
handset is not enrolled.
0049-004D FF .. FF IPUI_6 (ID for H/S 6) x D Ipui for handset 6. If set to FF
.
(5bytes) the
handset is not enrolled.
004E-008F - Reserved x - Protocol data
0090-009F - UAK_1 x - UAK for hanset 1 (for factory
use)
00A0-00AF - UAK_2 x - UAK for hanset 2 (for factory
use)
00B0-00BF - UAK_3 x - UAK for hanset 3 (for factory
use)
00C0-00CF - UAK_4 x - UAK for hanset 4 (for factory
use)
00D0-00DF - UAK_5 x - UAK for hanset 5 (for factory
use)
00E0-00EF - UAK_6 x - UAK for hanset 6 (for factory
use)
27.3.2. Switch Control
65