Panasonic KX-A143EXC - 28. EEPROM LAYOUT (HANDSET)

Address Default Name
Country
Setting
Type Description
0F4B 03 Config1 03 D BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0:
AmPmClockSettingEnabled,
1:
ClipDetectionSettingEnabled,
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled,
disabled
5:
SmscSendNumberSettingEnabled,
disabled
6:
SMSPabxSupportSettingEnabled,
disabled
7: Unused
0F4C D7 Config2
215
D BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled,
enabled
1: FlashTime2Enabled,
enabled
2: FlashTime3Enabled,
enabled
3: KeyClicksEnable, disabled
4: ARSCarrierMenuEnabled,
enabled
5:
ARSIntDeletionMenuEnabled,
6:
ARSMultipleCarrierMenuEnabled,
enabled
7:
ARSMultipleAreaCodeMenuEnabled,
enabled
0F4E FF Config2 255 D BsUiTask configuration 2
Bits 1=enable 0=disable
0: RingerModeMenuEnabled,
enabled
1:
CallRestrictionMenuEnabled,
2:
CancelHandsetMenuEnabled,
3: BaseToneMenusEnabled,
enabled
4-7: Unused
28. EEPROM LAYOUT (HANDSET)
28.1. Scope
The purpose of this section is to describe “layout of the EEPROM (IC2) KX-A143 Handset”.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are
set during production of the handset e.g. crystal oscillator adjustment at 0000..01, some are set
by the user when configuring the handset e.g. ringer volume at 0F38, and some during normal
use of the phone e.g. redial memory at 0311..0392.
68