Panasonic KX-F750 - How to Enter Letters and Symbols; To Enter Characters

Basic Settings
How to enter letters and symbols
The dial keypad and the direct call station 1 are used as alphabet and symbol character input keys when
you enter your logo and station names for automatic dialers.
To enter characters
Pressing each key will alternately select a character as shown below.
When the desired character is displayed, press # to move the cursor to the right and enter the next
character.
For example, when entering "Mike" as your logo:
@ Press 6 once, then press #. Q Press 5 five times, then press #.
@ Press 4 six times, then press #. Q Press 3 five times.
LOGO=Mi LOGO=Mike
Note:
eif you make a mistake while programming, use # or % to move the cursor to the incorrect character, then
make the correction.
34