Panasonic KX-F750 - Programming the Mailbox Password; How Incoming Messages Are Recorded into each Mailbox

Advanced Instructions
Programming the mailbox password
Program your own password for your mailbox to prevent other users from retrieving messages. You can
choose any 3-digit number except a number including "O".
Press MENU. Press START/SET.
9 MENU © START/SET
| 1.SYSTEM SET UP
For the mailbox 1, press
#51.
or
For the mailbox 2, press
#52.
Enter the new password
(111-999).
or
For the mailbox 3, press | O Press START/SET to
#53. START/SET store the setting.
| —To program other
Example: Mailbox 1 passwords, repeat
| from step 2.
BOX1 PASSWORD
Q TNT Press MENU to end the
| program.
Note:
e We recommend that you do not use seven (7) as a password number, because this number is used as the
greeting message re-recording command for remote operations.
How incoming messages are recorded into each mailbox
In order to leave a message in a mailbox, each owner of the mailboxes must inform their callers of their
mailbox number in advance and set the unit in the ANS/FAX mode.
@ ^ caller may call your unit (from a touch tone
telephone only).
— The common greeting message will be
(Your phone heard
number)
€)
They
may
press
X,
then
enter
the
desired
mailbox number (1-3).
— Personal greeting message will be heard,
followed by a long beep.
anpa
8) es) 5] 3) HÆLD
© They may leave a message in the mailbox.
AB i
|
e/f
a
caller
does
not
specify
the
mailbox
in
step
2,
the message will be recorded into the common
memory.
55