Panasonic KX-F750 - Setting Journal Auto Print

Reports and Lists
Setting journal auto print
This feature allows the unit to print a record of the last 35 fax communications (transmissions and
receptions) automatically.
After printing, memory will clear and the unit will begin to store new data of the journal report.
When this feature is deactivated, the journal report data is stored until the memory becomes full. When
memory is full and a new communication takes place, the oldest data will be erased and the newest data will
be stored.
To activate this feature, proceed as follows:
0
MENU
Press
MENU.
o
adel
Press
A
or
V
to
select
the desired mode.
A
Be
C) REDIAL/PAUSE
C OY
e Press #, then press 22. o Press START/SET to
START/SET store the setting.
DOD
© Press START/SET. QO nu Press MENU to end the
START/SET program.
MODE-ON [AV] |
67