Panasonic KX-F750 - Contro! Panel

Installation and Preparation
Control panel
(1) NEW MESSAGES button (page 28)
Used to play back only new messages.
(2) ERASE button (page 29)
Used to erase recorded incoming messages.
- (8) MAIL BOX button (page 56)
Used to select a voice mailbox number.
(4) DIRECTORY button (pages 16, 21 and 40)
Used for speed dialing. Also used for the
electronic telephone directory.
(5) RESOLUTION button (page 19)
Used to adjust scanning line density.
(6) RECEIVE MODE button (page 15)
Used to select the desired receiving mode.
(7) MENU button
Used to start and exit various programming.
HELP button (page 3)
Used to print an easy guide for operations.
(89 TONE button (page 53)
Used to temporarily change the dialing mode
from pulse to tone during a dialing operation.
CO vows. GT TA) vow
RINGERMANDSE T/SPEAKER
STOP COPY STAAT/SET
eed
Dial keypad
Used for dialing operation and parameter
setting. Also used as character keys.
(i) SP-PHONE/VOICE STDBY button
(pages 16 and 52)
Used for on-hook dialing and voice contact
features.
(2 MUTE button (page 17)
Used for voice muting.
(i3 REDIAL/PAUSE button (pages 17 and 53)
Used to redial the last dialed number. Also
used to insert a pause into a phone number.
FLASH button (page 53)
Used as a hook button. Also used to access
some features of your host exchange.
(3) STOP button (page 20)
Used to stop fax communication.
COPY button (page 27)
Used to start copying.
D START/SET button
Used to start fax communication. Also used to
store parameters during programming.