1. Introduction and Installation
13
6 Lift open the front cover (1), holding the dotted area
(2) on the right side.
L If the lower glass (3) is dirty, clean it with a soft
and dry cloth.
7 Install the drum and toner unit (1) by holding the
tabs.
L Do not touch the transfer roller (2).
L Make sure that the triangles (3) match to install
the drum and toner unit correctly.
8 Close the front cover (1) by pushing down on both
sides, until locked.
Toner save feature
If you want to reduce toner consumption, set the toner
save setting to ON (feature #79 on page 49). The toner
cartridge will last approximately 40 % longer. This
feature may lower the print quality.
1
2
3
1
2
3
1
FL323HK-PNQX2241ZA-OI-en.book Page 13 Thursday, August 6, 2009 10:12 AM
To Next Page
Loading...
