Panasonic KX-FL323HK - Receiving a Fax Automatically - Auto Answer on; Receiving a Fax Manually - Auto Answer off

4. Fax
36
4.6 Receiving a fax automatically
– Auto answer ON
4.6.1 Activating FAX ONLY mode
Press {Auto Answer} repeatedly to display the
following.
FAX ONLY MODE
L The {Auto Answer} indicator is ON.
How faxes are received
When receiving calls, the unit will automatically answer
all calls and only receive fax documents.
Note:
L The number of rings before a call is answered in FAX
ONLY mode can be changed (feature #06 on page
45).
If you have subscribed to a Distinctive Ring service
See page 41.
4.7 Receiving a fax manually –
Auto answer OFF
4.7.1 Activating TEL mode
1
Make sure feature #73 is set to “TEL” beforehand
(page 49).
2 Press {Auto Answer} repeatedly to display the
following.
TEL MODE
L The {Auto Answer} indicator is OFF.
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {Start}.
CONNECTING.....
3. Replace the handset.
L The unit will start fax reception.
L If you do not answer the call within 10 rings, the
unit will temporarily switch to fax reception. The
other party can then send a fax.
{Start} {Stop}
FL323HK-PNQX2241ZA-OI-en.book Page 36 Thursday, August 6, 2009 10:12 AM