Panasonic KX-FLM661 - 4.2 Scanning from a Computer (Pull Scan)

4. Scanner
32
4.2 Scanning from a computer
(Pull Scan)
4.2.1 Using Multi-Function scan
application
By clicking an application icon, the selected application
starts automatically after scanning.
1 Set the original (page 19).
2 Start Multi-Function Station. i [Scan]
3 Click the desired application icon.
L When you click [Custom], the pre-programmed
application starts.
L To cancel scanning while the documents are
being scanned, click [Cancel].
Note:
L You can change the scanning settings beforehand for
each application (page 26).
L By pointing to an application icon, scanning settings
are displayed as tooltip.
4.2.2 Using Multi-Function Viewer
1
Set the original (page 19).
2 Start Multi-Function Station.
3 [Utilities] i [Viewer]
L[Multi-Function Viewer] will appear.
4 Click the [Scan] icon in the [Multi-Function
Viewer] window.
L The unit’s name dialog box will appear.
5 If necessary, change the scanning settings on your
computer.
L To preview the scanned image, click [ Preview].
Only the first page will be previewed. You can
drag the frame to specify the scanned area. If
you change the scan settings, click [Preview] to
refresh the scanned image. Set the document
again before refreshing the scanned image.
L If you select [Black/White] for scan mode, the
contrast will not be set.
6 [Scan]
L If you preview the scanned image in step 5, set
the document again and click [Scan].
L The scanned image will be displayed in the
[Multi-Function Viewer] window after
scanning.
L To save the scanned image, select [Save As ...]
from the [File] menu.
L To cancel scanning while the documents are
being scanned, click [Cancel].
Note:
L You can display images in applications that support
TIFF, JPEG, PCX, DCX and BMP formats.
L You can save images in TIFF, JPEG, PCX, DCX,
BMP or PDF formats.
L If the [Select...] button is displayed in the [Target
Device], click the [Select...] to select the unit from
the list, then click [OK].
The [Select...] button will not be displayed when the
only one printer driver has been installed.
L You can move, copy and delete a file or page.
4.2.3 Using other applications
Multi-Function Station includes a TWAIN compliant
scanner driver. You can also scan using other
applications that support TWAIN scanning. For example,
proceed as follows:
1 Set the original (page 19).
2 Start an application that supports TWAIN scanning.
3 Select [Acquire Image...] from the [File] menu.
L The unit’s name dialog box will appear.
4 If necessary, change the scanning settings on your
computer. i [Scan]
L The scanned image will be displayed in the
application window after scanning.
L To cancel scanning while the documents are
being scanned, click [Cancel].
Note:
L Depending on the application used, the appearance
may differ slightly.
L If the [Select...] button is displayed in the [Target
Device], click the [Select...] to select the unit from
the list, then click [OK].
The [Select...] button will not be displayed when the
only one printer driver has been installed.