Installation/Troubleshooting
40
Indicator does
not light up.
• Indicator display is disabled.
Check if the indicator control is disabled (see page 107 of the
Operating Instructions on the Setup CD-ROM).
• Confirm that the standard AC adaptor PSLP1242 (Order No.
PSLP1242Y) is being used.
Indicator
continues
blinking red.
• The camera may be malfunctioning.
If you cannot access the camera, the camera may be
malfunctioning. Call our customer call center.
Problem Cause and Remedy
kxhcm280ait.book 40 ページ ２００５年３月９日 水曜日 午後１時２３分
To Next Page
Loading...
