Panasonic KX-HDV100 - SRV Lookup Prefix for TCP; SRV Lookup Prefix for TLS; Local SIP Port; Sip Uri

SRV lookup Prefix for TCP
Description Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TCP.
Note
• This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Value Range Max. 32 characters
Default Value _sip._tcp.
Configuration File Reference SIP_TCP_SRV_PREFIX_n (Page 208)
SRV lookup Prefix for TLS
Description Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TLS.
Note
• This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Value Range Max. 32 characters
Default Value _sips._tls.
Configuration File Reference SIP_TLS_SRV_PREFIX_n (Page 226)
Local SIP Port
Description Specifies the source port number used by the unit for SIP
communication.
Value Range 1024–49151
Default Value 5060 (for Line 1)
Configuration File Reference SIP_SRC_PORT_n (Page 207)
SIP URI
Description Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:user@example.com
", "2405551111_1".
Note
• When registering using a user ID that is not a phone number,
you should use this setting.
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com
"
in the example above) can contain up to 316 characters.
Document Version 2015-02 Administrator Guide 107
4.5.2 SIP Settings [Line 1]