Panasonic KX-HDV100 - Reg_Interval_Rate_N; Reg_Rtx_Intvl_N; Use_Del_Reg_Open_N; Use_Del_Reg_Close_N

REG_INTERVAL_RATE_n
Parameter Name Example
REG_INTERVAL_RATE_1
Value Format INTEGER
Description Specifies the percentage of the "expires" value after which to refresh
registration
by sending a new REGISTER message in the same dialog.
Value Range 1–100
Default Value 50
REG_RTX_INTVL_n
Parameter Name Example
REG_RTX_INTVL_1
Value Format INTEGER
Description Specifies the interval, in seconds, between transmissions of the
REGISTER request when a registration results in failure
(server no
reply or error reply).
Value Range 1–86400
Default Value 10
USE_DEL_REG_OPEN_n
Parameter Name Example
USE_DEL_REG_OPEN_1
Value Format BOOLEAN
Description Specifies whether to enable cancelation before registration when, for
example, the unit is turned on.
Value Range
• Y: Send un-REGISTER
• N: Does not send
Default Value
N
USE_DEL_REG_CLOSE_n
Parameter Name Example
USE_DEL_REG_CLOSE_1
Value Format BOOLEAN
Description Specifies whether to enable the cancelation of registration before the
SIP function shuts down when, for example, the configuration has
changed.
Value Range
• Y: Send un-REGISTER
• N: Does not send
Default Value
N
Document Version 2015-02 Administrator Guide 209
5.3.19 SIP Settings