Panasonic KX-HDV100 - Add_Transport_Udp_N; Sip_Add_Diversion_N; Transfer_Recall_Tim; Signal_Compression_N

ADD_TRANSPORT_UDP_n
Parameter Name Example
ADD_TRANSPORT_UDP_1
Value Format BOOLEAN
Description Specifies whether to add the attribute "transport=udp"
to the SIP header
URI.
Value Range
• Y (Add Transport UDP)
• N (Do not add Transport UDP)
Default Value
N
SIP_ADD_DIVERSION_n
Parameter Name Example
SIP_ADD_DIVERSION_1
Value Format INTEGER
Description Specifies whether to add Diversion header information.
Value Range 0–2
– 0: Do not add Diversion header information
– 1: Use own diversion information only for the Diversion header
– 2: Add diversion information to existing Diversion header
Default Value 0
TRANSFER_RECALL_TIM
Value Format INTEGER
Description Specifies the time that the original call is resumed when the forwarding
party does not response by Refer method for call transfer.
Value Range 0, 1–240
Default Value 0
SIGNAL_COMPRESSION_n
Parameter Name Example
SIGNAL_COMPRESSION_1
Value Format INTEGER
Description Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
Value Range
• 0: Disable
• 1: Enable (Required)
• 2: Enable (Supported)
Default Value 0
220 Administrator Guide Document Version 2015-02
5.3.19 SIP Settings