Panasonic KX-HDV100 - Dial_Tone1_Frq; Dial_Tone1_Gain; Dial_Tone1_Rpt; Dial_Tone1_Timing

Description Specifies the duration, in seconds, that a disconnect tone will be heard
when the other party ends a call and the unit is being used.
Value Range 1–15 (s)
Default Value 3
DIAL_TONE1_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of Dial Tone 1 using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 350,440
Web User Interface Reference Tone Frequencies (Page 130)
DIAL_TONE1_GAIN
Value Format INTEGER
Description Specifies the gain, in decibels, of Dial Tone 1.
Value Range -24–6 (dB)
Default Value 0
DIAL_TONE1_RPT
Value Format INTEGER
Description Specifies whether Dial Tone 1 is repeated.
Value Range 0–1
• 0: No Repeat
• 1: Repeat
Default Value 0
DIAL_TONE1_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of Dial Tone 1 using up to 10
whole numbers
(off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
246 Administrator Guide Document Version 2015-02
5.3.28 Tone Settings