Panasonic KX-HDV100 - Reorder_Tone_Timing; Ringback_Tone_Frq; Ringback_Tone_Gain; Ringback_Tone_Rpt

REORDER_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers
(off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Continuous)
Note
• Avoid setting 1–50 for any of the values.
Default Value 60,250,190
Web User Interface Reference Tone Timings (Page 134)
RINGBACK_TONE_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone
frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 440,480
Web User Interface Reference Tone Frequencies (Page 132)
RINGBACK_TONE_GAIN
Value Format INTEGER
Description Specifies the gain, in decibels, of the ringback tone.
Value Range -24–6 (dB)
Default Value 0
RINGBACK_TONE_RPT
Value Format INTEGER
Description Specifies whether the ringback tone is repeated.
Value Range 0–1
– 0: No Repeat
– 1: Repeat
Default Value 1
Document Version 2015-02 Administrator Guide 251
5.3.28 Tone Settings