Result Message Description Applicable Screens
Complete The operation has successfully completed. All screens except
4.6.7 Export Phonebook
Failed (Parameter Error) The operation failed because:
• Some
specified values are out of range
or invalid.
All screens
Failed (Memory Access
Failure)
The operation failed because:
• Access error to the flash memory
occurred while reading or writing the
data.
All screens
Failed (Transfer Failure)
*1
The operation failed because:
• A network error occurred during the
data transmission.
All screens
Failed (Busy) The operation failed because:
• The unit is in an operation that
accesses
the flash memory of the unit.
All screens
• When attempting to import/export the
phonebook data, the unit is on a call.
• While
transferring the phonebook data,
a call arrived at the unit.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
Failed (Canceled) The operation failed because:
• While
transferring the phonebook data,
the connection with the unit was
interrupted.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
Failed (Invalid File) The operation failed because:
• Analysis of the received data failed.
4.6.6 Import Phonebook
Failed (File Size Error) The operation failed because:
• The size of the imported phonebook is
too large.
4.6.6 Import Phonebook
No Data The operation failed because:
• The imported phonebook file contains
no valid phonebook entries.
4.6.6 Import Phonebook
• No
phonebook entry is registered in the
export source the unit.
4.6.7 Export Phonebook
*1
"Failed (Transfer Failure)" may not be displayed depending on your Web browser.
1.2 Firmware Update
1.2.1 Firmware Update
You can update the unit’
s firmware to improve the unit’s operation. You can configure the unit so that it
automatically downloads the new firmware file from a specified location. The firmware update will be executed
when the unit is restarted.
30 Administrator Guide Document Version 2015-02
1.2.1 Firmware Update
To Next Page
Loading...
