Panasonic KX-HDV100 - Obtaining a Provisioning Server Address Via SIP Pnp

Macro Format {XXXX} Macro Expansion
{MODEL} If the URL contains {MODEL}, it will be replaced with the
device’s model name.
Example: {MODEL} ® KX-HDV100
{fwver} If the URL contains {fwver}, it will be replaced with the
device’s firmware version.
Example: {fwver} ® 01.000
Note
• Macros distinguish between uppercase and lowercase letters.
• Macros not specified above will be treated as strings of characters.
2.1.4 Obtaining a Provisioning Server Address via SIP PnP
1. Basic Sequence
At startup, the phone will multicast a SIP SUBSCRIBE message for the ua-profile event, receive a SIP
NOTIFY message from the PnP server and obtain a pre-provisioning server address. It will then obtain a
provisioning server address from the pre
-provisioning server.
A B
C
D
D
D
A
C
B
A. KX-HDV100
B. PnP Server
C. Pre-provisioning Server
D. xxxxxxxxxxxx.cfg
SUBSCRIBE (multicast)
NOTIFY (unicast)
Body http://server/{MODEL}.cfg
HTTP GET {MODEL}.cfg
200OK
Obtain provisioning server information
Document Version 2015-02 Administrator Guide 35
2.1.4 Obtaining a Provisioning Server Address via SIP PnP