Panasonic KX-HDV100 - Password; Max Hits; System; Language Settings

Password
Description Specifies the authentication password used to access the LDAP server.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference XMLAPP_LDAP_USERPASS (Page 185)
Max Hits
Description Specifies the maximum number of search results to be returned by the
LDAP server.
Value Range 20–500
Default Value 20
Configuration File Reference XMLAPP_LDAP_MAXRECORD (Page 185)
4.4 System
This section provides detailed descriptions about all the settings classified under the [System] tab.
4.4.1 Language Settings
This screen allows you to select the language used for the Web user interface. The language setting is only
applicable when you log in to the Web user interface as User.
Note
• If you change the language while logged in to the Web user interface with the User account, the
language will be changed after the message "Complete" is displayed. If you are logged in with the
Administrator account, the language will be changed when a user logs in to the Web user interface as
User.
• The language used for the Web user interface for the Administrator account is always English.
• The language used for the unit remains unchanged even if the language for the Web user interface is
changed.
Document Version 2015-02 Administrator Guide 89
4.4.1 Language Settings