5 | Page
© Nextiva, All Rights Reserved
Once you have connected the Wall Mount Plate to the phone via the tabs, follow the steps below
(Figure 1-4):
1. Fasten the wall mounting adapter to the base with the small screw.
2. Connect the AC adapter and handset cord.
3. Drive the large screws into the wall either 3 ¼ inches apart or 3 15/16 inches apart, and mount
the unit to the wall.
Figure 1-4: Attaching to the Wall
• *1 – 1 37/64 inches or less
• *2 – AC Adapter
• *3 – Ethernet cables
• *4 – Washer
• *5 – Drive the screw to this point
• *6 – 3 ¼ inches
• *7 – 3 15/16 inches apart
To Next Page
Loading...
