Default Value en
Configuration File Reference WEB_LANGUAGE
4.4.2 User Password Settings
This screen allows you to change the password used to authenticate the User account when logging in to
the Web user interface.
Note
• For security reasons, the characters entered for the password are masked by special characters,
which differ depending on the Web browser.
• After you change the user password, the next time you access the Web user interface, the
authentication dialog box appears. Three consecutive login failures will result in an error
("401Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
4.4.2.1 User Password
Current Password
Description Specifies the current password to use to authenticate the User
account when logging in to the Web user interface.
Value Range 6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =,
>, ?, [, ], ^, `, {, |, }, ~, \ and space)
Default Value Not stored.
New Password
Description Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
4.4.2 User Password Settings
Document Version: 2017-07 Administrator Guide 101
To Next Page
Loading...
