4.5.2 SIP Settings [Line 1]–[Line n]
Note
Line n: The number of lines available varies depending on the phone being used.
This screen allows you to change the SIP settings that are specific to each line.
4.5.2.1 Basic
Phone Number
Description Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
• When registering using a user ID that is not a phone number,
you should use the [SIP URI] setting.
Value Range Max. 32 characters
Default Value Not stored.
Configuration File Reference PHONE_NUMBER_n
Registrar Server Address
Description Specifies the IP address or FQDN of the SIP registrar server.
Value Range Max. 256 characters
4.5.2 SIP Settings [Line 1]–[Line n]
116 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
